Description

The key role of Performance Headers is to replace your vehicle’s restrictive exhaust manifolds, for increased flow and a boost in engine performance. Whether you’re looking to get more power out of your 4WD, or simply reduce strain on the engine when towing or under load; Torqit Performance Headers will increase exhaust flow for an overall improvement in power, note and efficiency.

Torqit’s Performance Headers for the Y62 Nissan Patrol are a long tube design, mandrel bent and manufactured here in Australia. The length and smooth, constant diameter of the pipes helps reduce back pressure, increasing the air ratio and helping the engine work at maximum capacity. Dependent on driving behavior, this can significantly improve the Patrol’s fuel economy when cruising long distances at a constant speed.

Torqit’s Y62 Headers are fully ceramic coated which provides long-term protection, performance and preserves the sleek finish. Acting as a thermal barrier, Torqit’s Turbo X coating is rated to 1000 degrees, and can withstand high temperatures and corrosion without cracking or flaking.

We recommend combining with Torqit’s Y62 Patrol Performance Exhaust and High Flow Catalytic Converters for maximum performance and a deep, aggressive note.*

To completely transform the performance of your 4WD, read up on our top recommendations for the Y62 Patrol here.

Installing Torqit’s Y62 Performance Headers is a 5-6 hour process. As it requires a hoist and mechanical expertise, we highly recommend using an experienced fitter.*

Torqit’s Headers are interchangeable with the stock components on your vehicle, however we recommend installing alongside Torqit’s Y62 Performance Exhaust and High Flow Cats to eliminate all restriction and get the best performance out of your vehicle.

Specifications

  • Thick Stainless Steel
    • An exhaust system is exposed to many varied elements, including extreme heat and rough terrain. To handle these harsh conditions, we use stainless steel that is up to 2mm thick to maintain structural strength even after bending. Being extremely durable and difficult to crack, you can go off-road with peace of mind that your Torqit Performance Exhaust system will stay intact. Steel thickness not only affects the strength of an exhaust system, but also the sound it will produce- the thinner the steel, the tinnier the note. As among the thickest mandrel bent systems available in Australia, Torqit Performance Exhausts produce a deep note without cabin drone. Click here to listen to the sound of cheap vs quality stainless steel.
  • 304 Grade Stainless Steel
    • The highest quality steel used in exhaust systems is 304 grade stainless, which is renowned for its high strength, corrosion resistance, and easy maintenance. It is known as an austenitic stainless steel, meaning due to a high percentage of chromium and nickel it is extremely resistant to rust, stress, and harsh conditions such as high temperatures. The excellent properties of Torqit’s 304 grade stainless demonstrate its strength in comparison to the 409 grade stainless commonly used in the automotive industry. For heavy duty strength and resistance to corrosion, 304 grade stainless steel is the superior choice. A 4WD owner who undertakes water crossings, backs their vehicle into the water to unload a boat, or lives by the coast will especially benefit from our stainless steel systems. Find out more on the difference between 304 and 409 grade steel.
  • Internal & External Welds
    • High quality welds are essential to avoiding structural fatigue on joints, stopping cracks from forming, and preventing exhaust gas leaks. All flanges used in Torqit Performance Exhausts are TIG welded internally and externally, to reinforce the system for maximum strength. TIG welding is complex and more time consuming than the usual MIG welding technique used on exhausts; however it is a key part of creating a premium system. Torqit’s welds are extremely precise, higher quality, and create a beautiful clean finish with no welding spatter.
  • Mandrel Bent System
    • Torqit’s Mandrel Bender uses a flexible mandrel rod to support the pipe internally and prevent crinkling as it is bent. This maintains a smooth and constant diameter, improving the efficiency of your engine. With Torqit’s in house mandrel bender, we can maintain the structural integrity and thickness of our systems, prevent restricted exhaust flow, and reduce back pressure. State of the art programming means each exhaust is precisely replicated to follow the correct path, and guarantees accurate fitment. Check out the Torqit Mandrel Bender in action.
  • Titanium Coated Dump Pipes
    • Unique to Torqit, our titanium coated dump pipes have extremely high heat resistance. Their aim is to protect the engine and its components by dispersing heat and cooling rapidly. Titanium is a tough, low-corrosion metal, and is significantly more durable than ceramic coatings which deteriorate by chipping, cracking and corroding over time. Torqit’s titanium coated dump pipes have a longer lifespan and maintain their form as the colour gradually vaporizes, leaving a rainbow-like appearance from reacting with heat.
  • High Flow Diesel Catalytic Converter
    • Torqit’s high flow catalytic converters focus on increasing exhaust flow, so your engine can breathe more freely and effectively disperse heat to lower your EGT’s. Consisting of a stainless steel case around a honeycomb structure made of various precious metals, our high flow units are 200 CPSI in comparison to the 400 CPSI of standard cats. The reduced CPSI of our cats means they work harder and faster, keeping your vehicle legal while improving power, fuel economy and overall performance. If your vehicle has been remapped, heavily modified or upgraded with a supercharger/turbocharger, our high flow cats will especially increase your engines power output.
  • Double Braided Flex Bellows
    • Flex bellows are an exhaust flex joint, designed to absorb excess movement and vibrations on the vehicles chassis. This prevents strain on the exhaust system, stops cracks from forming, and caters for slight adjustments when aligning and fastening the exhausts flanges. Torqit’s flex bellows are made from 304 grade stainless steel for superior strength, in comparison to the commonly used 409 grade stainless. The double braided design reinforces the bellow to prevent escape of gases, reduces deterioration from heat and gases, and increases the longevity and performance of your exhaust system.
  • Brushed stainless steel tube up to 2mm thick
  • Premium 304 grade stainless steel
  • Fully mandrel bent system
  • TIG welded
  • Three-bolt laser cut flanges, welded internally and externally
  • Heavy-duty wrap around brackets
  • Stainless steel resonator/muffler
  • Double braided stainless steel flex bellows
  • Titanium coated dump pipes to support heat dispersion
  • High flow diesel specific catalytic converter
  • Deep note without cabin drone
  • DIY bolt together install
  • Ten year product warranty

Compatibility

  • 2010+ Nissan Patrol Y62 5.6L Series 4 & 5

The key role of Performance Headers is to replace your vehicle’s restrictive exhaust manifolds, for increased flow and a boost in engine performance. Whether you’re looking to get more power out of your 4WD, or simply reduce strain on the engine when towing or under load; Torqit Performance Headers will increase exhaust flow for an overall improvement in power, note and efficiency.

Torqit’s Performance Headers for the Y62 Nissan Patrol are a long tube design, mandrel bent and manufactured here in Australia. The length and smooth, constant diameter of the pipes helps reduce back pressure, increasing the air ratio and helping the engine work at maximum capacity. Dependent on driving behavior, this can significantly improve the Patrol’s fuel economy when cruising long distances at a constant speed.

Torqit’s Y62 Headers are fully ceramic coated which provides long-term protection, performance and preserves the sleek finish. Acting as a thermal barrier, Torqit’s Turbo X coating is rated to 1000 degrees, and can withstand high temperatures and corrosion without cracking or flaking.

We recommend combining with Torqit’s Y62 Patrol Performance Exhaust and High Flow Catalytic Converters for maximum performance and a deep, aggressive note.*

To completely transform the performance of your 4WD, read up on our top recommendations for the Y62 Patrol here.

Installing Torqit’s Y62 Performance Headers is a 5-6 hour process. As it requires a hoist and mechanical expertise, we highly recommend using an experienced fitter.*

Torqit’s Headers are interchangeable with the stock components on your vehicle, however we recommend installing alongside Torqit’s Y62 Performance Exhaust and High Flow Cats to eliminate all restriction and get the best performance out of your vehicle.

  • Thick Stainless Steel
    • An exhaust system is exposed to many varied elements, including extreme heat and rough terrain. To handle these harsh conditions, we use stainless steel that is up to 2mm thick to maintain structural strength even after bending. Being extremely durable and difficult to crack, you can go off-road with peace of mind that your Torqit Performance Exhaust system will stay intact. Steel thickness not only affects the strength of an exhaust system, but also the sound it will produce- the thinner the steel, the tinnier the note. As among the thickest mandrel bent systems available in Australia, Torqit Performance Exhausts produce a deep note without cabin drone. Click here to listen to the sound of cheap vs quality stainless steel.
  • 304 Grade Stainless Steel
    • The highest quality steel used in exhaust systems is 304 grade stainless, which is renowned for its high strength, corrosion resistance, and easy maintenance. It is known as an austenitic stainless steel, meaning due to a high percentage of chromium and nickel it is extremely resistant to rust, stress, and harsh conditions such as high temperatures. The excellent properties of Torqit’s 304 grade stainless demonstrate its strength in comparison to the 409 grade stainless commonly used in the automotive industry. For heavy duty strength and resistance to corrosion, 304 grade stainless steel is the superior choice. A 4WD owner who undertakes water crossings, backs their vehicle into the water to unload a boat, or lives by the coast will especially benefit from our stainless steel systems. Find out more on the difference between 304 and 409 grade steel.
  • Internal & External Welds
    • High quality welds are essential to avoiding structural fatigue on joints, stopping cracks from forming, and preventing exhaust gas leaks. All flanges used in Torqit Performance Exhausts are TIG welded internally and externally, to reinforce the system for maximum strength. TIG welding is complex and more time consuming than the usual MIG welding technique used on exhausts; however it is a key part of creating a premium system. Torqit’s welds are extremely precise, higher quality, and create a beautiful clean finish with no welding spatter.
  • Mandrel Bent System
    • Torqit’s Mandrel Bender uses a flexible mandrel rod to support the pipe internally and prevent crinkling as it is bent. This maintains a smooth and constant diameter, improving the efficiency of your engine. With Torqit’s in house mandrel bender, we can maintain the structural integrity and thickness of our systems, prevent restricted exhaust flow, and reduce back pressure. State of the art programming means each exhaust is precisely replicated to follow the correct path, and guarantees accurate fitment. Check out the Torqit Mandrel Bender in action.
  • Titanium Coated Dump Pipes
    • Unique to Torqit, our titanium coated dump pipes have extremely high heat resistance. Their aim is to protect the engine and its components by dispersing heat and cooling rapidly. Titanium is a tough, low-corrosion metal, and is significantly more durable than ceramic coatings which deteriorate by chipping, cracking and corroding over time. Torqit’s titanium coated dump pipes have a longer lifespan and maintain their form as the colour gradually vaporizes, leaving a rainbow-like appearance from reacting with heat.
  • High Flow Diesel Catalytic Converter
    • Torqit’s high flow catalytic converters focus on increasing exhaust flow, so your engine can breathe more freely and effectively disperse heat to lower your EGT’s. Consisting of a stainless steel case around a honeycomb structure made of various precious metals, our high flow units are 200 CPSI in comparison to the 400 CPSI of standard cats. The reduced CPSI of our cats means they work harder and faster, keeping your vehicle legal while improving power, fuel economy and overall performance. If your vehicle has been remapped, heavily modified or upgraded with a supercharger/turbocharger, our high flow cats will especially increase your engines power output.
  • Double Braided Flex Bellows
    • Flex bellows are an exhaust flex joint, designed to absorb excess movement and vibrations on the vehicles chassis. This prevents strain on the exhaust system, stops cracks from forming, and caters for slight adjustments when aligning and fastening the exhausts flanges. Torqit’s flex bellows are made from 304 grade stainless steel for superior strength, in comparison to the commonly used 409 grade stainless. The double braided design reinforces the bellow to prevent escape of gases, reduces deterioration from heat and gases, and increases the longevity and performance of your exhaust system.
  • Brushed stainless steel tube up to 2mm thick
  • Premium 304 grade stainless steel
  • Fully mandrel bent system
  • TIG welded
  • Three-bolt laser cut flanges, welded internally and externally
  • Heavy-duty wrap around brackets
  • Stainless steel resonator/muffler
  • Double braided stainless steel flex bellows
  • Titanium coated dump pipes to support heat dispersion
  • High flow diesel specific catalytic converter
  • Deep note without cabin drone
  • DIY bolt together install
  • Ten year product warranty
  • 2010+ Nissan Patrol Y62 5.6L Series 4 & 5

Best Sellers