Description

Kings Premium Inverter Remote Display

Backlit LCD Screen | Remote Control and Display | Easy Mounting Options


INVERTER CONTROL AT YOUR FINGERTIPS

With an inverter remote switch you can turn your Adventure Kings Inverter on or off easily, even if your inverter is tucked out of the way. It makes complicated or high-end 12V setups simple with the two-button control, and gives you the option to mount the switch just about anywhere.


MAKE THE MOST OF YOUR INVERTER

The Inverter Remote Display enhances the functionality of your inverter by allowing you to monitor real time power usage, battery voltage, and inverter voltage. With built in error codes, it is simple to diagnose any fault conditions that may occur. The backlight can be left on to enable constant monitoring of power output and the voltage reaching the inverter.


WORKS WITH KINGS INVERTERS

Compatible with the Adventure Kings 1000W, 2000W and 3000W Pure Sine Wave Inverters* - The Inverter Remote Switch uses a RJ12 style plug and is a simple plug-n-play setup.
*Only suitable for Kings 1000W Pure Sine Inverter AKEP-INV1000W_02, Kings 2000W Pure Sine Inverter AKEP-INV2000W_02, and Kings 3000W Pure Sine Inverter AKEP-INV3000W_02


LOW PROFILE PANEL MOUNT DESIGN

The Inverter Remote Switch is designed to mount flush on a surface. The built-in electronics are recessed into the back of the unit and the cabling is removable and kept hidden for a neat and tidy finish.


3 metres OF CABLE

With 3m of cable included it is super simple to position your inverter so it’s out of the way, then route the cable and position the Remote Display in an easy-to-reach location.


Specifications

  • Plug Type: RJ12
  • Cable Length: 3m
  • Display: LCD with backlight
  • Dimensions (External): 100 x 70 x 25 mm
  • Dimensions (Cut-out Minimum): 85 x 50 x 22 mm

Kings Premium Inverter Remote Display

Backlit LCD Screen | Remote Control and Display | Easy Mounting Options


INVERTER CONTROL AT YOUR FINGERTIPS

With an inverter remote switch you can turn your Adventure Kings Inverter on or off easily, even if your inverter is tucked out of the way. It makes complicated or high-end 12V setups simple with the two-button control, and gives you the option to mount the switch just about anywhere.


MAKE THE MOST OF YOUR INVERTER

The Inverter Remote Display enhances the functionality of your inverter by allowing you to monitor real time power usage, battery voltage, and inverter voltage. With built in error codes, it is simple to diagnose any fault conditions that may occur. The backlight can be left on to enable constant monitoring of power output and the voltage reaching the inverter.


WORKS WITH KINGS INVERTERS

Compatible with the Adventure Kings 1000W, 2000W and 3000W Pure Sine Wave Inverters* - The Inverter Remote Switch uses a RJ12 style plug and is a simple plug-n-play setup.
*Only suitable for Kings 1000W Pure Sine Inverter AKEP-INV1000W_02, Kings 2000W Pure Sine Inverter AKEP-INV2000W_02, and Kings 3000W Pure Sine Inverter AKEP-INV3000W_02


LOW PROFILE PANEL MOUNT DESIGN

The Inverter Remote Switch is designed to mount flush on a surface. The built-in electronics are recessed into the back of the unit and the cabling is removable and kept hidden for a neat and tidy finish.


3 metres OF CABLE

With 3m of cable included it is super simple to position your inverter so it’s out of the way, then route the cable and position the Remote Display in an easy-to-reach location.


  • Plug Type: RJ12
  • Cable Length: 3m
  • Display: LCD with backlight
  • Dimensions (External): 100 x 70 x 25 mm
  • Dimensions (Cut-out Minimum): 85 x 50 x 22 mm

Best Sellers