Description

This Strut Spacers 20mm Lift Suitable For Ford Ranger PX-PXII-PXIII, Toyota Prado 90, Holden Colorado RG and Colorado 7 RG.

These spacers are simply bolted to the top of the strut to provide approximately 20mm of lift.

You remove the coil from the strut and the spacer fits between the coil spring and the strut top using the supplied bolts.

You will need a coil compressor to remove the coils safely.

Superior Engineering has designed these as a cheap alternative to correct sag after fitting a bull bar, Dual batteries or other heavy accessories.

Laser-cut from 10mm plate steel for precise fit and zinc coated.

Although they are 10mm thick they will lift the front end up by 20mm over the axles.

Supplied with:

  • 2 x 10mm strut spacers
  • 6 x M10x1.25 x 40mm button head bolts
  • 6 x M10 Nylocks
  • 6 x M10 Flat washers

SOLD AS A KIT.

Note: It is only recommended to use strut spacers on standard length struts, if you use longer struts ( aftermarket) then you must check down travel, make sure the cv's do not bind and there are no fouling issues with steering components and no steering components move past there maximum working angles.

Superior Strut Spacers 20mm Lift Suitable For Ford Ranger/Toyota Prado 90/Holden Colorado (Kit) - 9520MMSS

Specifications

Compatibility

  • 2011 - 2015 Ford Ranger PX, Ute Diesel 2.2, 3.0 & 3.2ltr
  • 1996 - 2003 Toyota LandCruiser Prado 90, Wagon LWB Petrol 2.7 & 3.4ltr
  • 1996 - 2003 Toyota LandCruiser Prado 90, Wagon LWB Diesel 2.8 & 3.0ltr TD
  • 2012 - 2019 Isuzu D-max Series 2, Ute Diesel 3.0ltr TD
  • 2012 - 2020 Holden Colorado RG, Ute Diesel 2.5 & 2.8ltr
  • 2014 - 2020 Holden Colorado 7 RG, Wagon Diesel 2.5 & 2.8ltr
  • 1996 - 2003 Toyota LandCruiser Prado 90, Wagon SWB Petrol 2.7 & 3.4ltr
  • 1996 - 2003 Toyota LandCruiser Prado 90, Wagon SWB Diesel 2.8 & 3.0ltr TD
  • 2015 - 2018 Ford Ranger PX II, Ute Diesel 2.2 & 3.2ltr TDCi
  • 2018 - 2022 Ford Ranger PX III, Ute Diesel 2.0, 2.2 & 3.2ltr
  • 2020 Isuzu D-max Series 3, Ute

This Strut Spacers 20mm Lift Suitable For Ford Ranger PX-PXII-PXIII, Toyota Prado 90, Holden Colorado RG and Colorado 7 RG.

These spacers are simply bolted to the top of the strut to provide approximately 20mm of lift.

You remove the coil from the strut and the spacer fits between the coil spring and the strut top using the supplied bolts.

You will need a coil compressor to remove the coils safely.

Superior Engineering has designed these as a cheap alternative to correct sag after fitting a bull bar, Dual batteries or other heavy accessories.

Laser-cut from 10mm plate steel for precise fit and zinc coated.

Although they are 10mm thick they will lift the front end up by 20mm over the axles.

Supplied with:

  • 2 x 10mm strut spacers
  • 6 x M10x1.25 x 40mm button head bolts
  • 6 x M10 Nylocks
  • 6 x M10 Flat washers

SOLD AS A KIT.

Note: It is only recommended to use strut spacers on standard length struts, if you use longer struts ( aftermarket) then you must check down travel, make sure the cv's do not bind and there are no fouling issues with steering components and no steering components move past there maximum working angles.

Superior Strut Spacers 20mm Lift Suitable For Ford Ranger/Toyota Prado 90/Holden Colorado (Kit) - 9520MMSS

  • 2011 - 2015 Ford Ranger PX, Ute Diesel 2.2, 3.0 & 3.2ltr
  • 1996 - 2003 Toyota LandCruiser Prado 90, Wagon LWB Petrol 2.7 & 3.4ltr
  • 1996 - 2003 Toyota LandCruiser Prado 90, Wagon LWB Diesel 2.8 & 3.0ltr TD
  • 2012 - 2019 Isuzu D-max Series 2, Ute Diesel 3.0ltr TD
  • 2012 - 2020 Holden Colorado RG, Ute Diesel 2.5 & 2.8ltr
  • 2014 - 2020 Holden Colorado 7 RG, Wagon Diesel 2.5 & 2.8ltr
  • 1996 - 2003 Toyota LandCruiser Prado 90, Wagon SWB Petrol 2.7 & 3.4ltr
  • 1996 - 2003 Toyota LandCruiser Prado 90, Wagon SWB Diesel 2.8 & 3.0ltr TD
  • 2015 - 2018 Ford Ranger PX II, Ute Diesel 2.2 & 3.2ltr TDCi
  • 2018 - 2022 Ford Ranger PX III, Ute Diesel 2.0, 2.2 & 3.2ltr
  • 2020 Isuzu D-max Series 3, Ute

Best Sellers