Description

Our Pajero bash plates will fit all models from the NM to the NX. The plates have been designed to use the existing holes that the standard plates bolts to and to work with all Bull Bars. Made from 4mm Stainless Steel they give the protection of 4mm Mild Steel but without the weight and a longer durability.

  • Plates are supplied with “Pajero” cut out or Custom Offroad.

  • Australian Made, all our plates are made right here in Brisbane!

  • 3 piece Front, Diff/Sump Guard and Transmission Combo

  • Replace the 1.5mm standard tin and plastic plates.

  • Slim Design for maximum clearance, no modifications and only 5 mins to fit.

  • New Bolts Supplied

  • Specials, deals and competitions are posted on our Facebook page. Search ‘Custom Offroad Accessories’

  • Ventilation tested to the Cape and Back

 

What You Need to Know:

  • Stainless is superior alternative to Mild Steel, this will Not crack over time and is stronger and lighter. No need for painting and rust proof.

  • Fits using all factory bolt holes and new bolts supplied

  • Mounts are only required once the factory mounts have broken. This happens due to poor welds and being hit while 4x4ing.

  • Fits with all bull bars and Nudge bar

Compatibility

  • Series: NM to NX Diesel
  • Fitting note: The front 2 plates will fit the petrol but the trans plate may hit the petrol exhaust
  • Fitting note: Third plate Does Not cover dpf on new vehicles, fitting it requires it to be clamped onto transfer case crossmember at rear.
  • All plates in this kit are 4mm Stainless Steel.

Our Pajero bash plates will fit all models from the NM to the NX. The plates have been designed to use the existing holes that the standard plates bolts to and to work with all Bull Bars. Made from 4mm Stainless Steel they give the protection of 4mm Mild Steel but without the weight and a longer durability.

  • Plates are supplied with “Pajero” cut out or Custom Offroad.

  • Australian Made, all our plates are made right here in Brisbane!

  • 3 piece Front, Diff/Sump Guard and Transmission Combo

  • Replace the 1.5mm standard tin and plastic plates.

  • Slim Design for maximum clearance, no modifications and only 5 mins to fit.

  • New Bolts Supplied

  • Specials, deals and competitions are posted on our Facebook page. Search ‘Custom Offroad Accessories’

  • Ventilation tested to the Cape and Back

 

What You Need to Know:

  • Stainless is superior alternative to Mild Steel, this will Not crack over time and is stronger and lighter. No need for painting and rust proof.

  • Fits using all factory bolt holes and new bolts supplied

  • Mounts are only required once the factory mounts have broken. This happens due to poor welds and being hit while 4x4ing.

  • Fits with all bull bars and Nudge bar

  • Series: NM to NX Diesel
  • Fitting note: The front 2 plates will fit the petrol but the trans plate may hit the petrol exhaust
  • Fitting note: Third plate Does Not cover dpf on new vehicles, fitting it requires it to be clamped onto transfer case crossmember at rear.
  • All plates in this kit are 4mm Stainless Steel.

Best Sellers