Note: Classified as Dangerous Goods, we only ship this product within Australia.

JLM’s AdBlue Plus J02835 additive cleans and prevents crystal formation in the AdBlue dosing system. It also conditions the AdBlue fluid for a longer time to ensure proper working of the AdBlue and Selective Catalytic Reduction (SCR) system. This unique chemical makeup helps prevent performance loss in the short term while reducing your chances of expensive repairs in the long-run. It also reduces foaming at low temperatures.

Compared to other leading products in the industry, JLM’s AdBlue Plus 250ml creates fewer biuret, triuret and cyanuric acid deposits in critical areas of the fuel system, with a lower rate of AdBlue crystallisation at lower temperatures. The JLM AdBlue Plus allows the use of cheap standard urea without any of the problems that face its competitors: namely no clean-up effect, conformity to EN-norm surface tension and no foaming problems. Look after your system with the best today.

ABOUT ADBLUE

AdBlue is a fluid which is automatically sprayed into a car’s exhaust system (Selective Catalytic Reduction – SCR) to reduce the nitrous oxide emissions of diesel engines. AdBlue is made of a mixture of urea and deionized water. The widespread usage of AdBlue in modern diesel cars coincided with stricter Euro 6 emissions standards that have been in effect since 2016.

AdBlue makes it much easier to lower the emissions of diesel cars, so they comply with these regulations.

AdBlue is usually checked and topped up if necessary, during a normal service, but it’s a good idea to check it and top it up between these intervals. Almost all cars that use AdBlue are fitted with a gauge on the dashboard to warn you if you’re running low.

USAGE DIRECTIONS

Because it is unlikely you will know the exact amount of existing AdBlue in the reservoir of your car, we recommend premixing the JLM AdBlue Plus additive with the AdBlue top up fluid BEFORE pouring it into your car’s AdBlue reservoir.

Check the table on the JLM AdBlue Plus bottle to see how many milliliters of AdBlue Plus to add.

Squeeze the bottle to fill the dosing chamber with the corresponding volume. It is important NOT TO OVERDOSE as this will have a negative effect on the good working of the AdBlue fluid.

Empty the contents of the dosing chamber into the container with the AdBlue.

Pour the premixed fluid into the AdBlue container of your car.