Description

BD Diesel - 1040022

BD Cummins Killer Frost Plug Plate - Dodge 1989-2002 5.9L

The coolant pressure inside the engine block can reach 70+psi at high rpm before the thermostat fully opens. This will cause a corroded frost plug to leak. The BD rear frost plug is able to be seal the leak without the need to hammer out the old frost plug. We recommend installing the rear frost plug plate when the transmission is removed. The plate can be installed with the transmission in place, however the surface finish on the back of the motor is critical and must be checked prior to use.

  • Works W/Frost Plug In Place/Blown Out/Leaking
  • No Need To Punch The Old Frost Plug Out
  • Utilizes One Large 333 O-Ring
  • Works With or Without A TCC Crossover Tube
  • Perfect Time To Install One Is When Transmission Is Removed
  • 12 Month Parts Warranty

Category: Killer Frost Plug Plate
Engine: 5.9L Cummins 98.5-02 24-Valve
Make: Dodge
Suggested Product: 1040182

Compatibility

  • 1989-1993 Dodge D250 Base L6.-cc
  • 1989-1993 Dodge D250 Base V8.-cc
  • 1989-1993 Dodge D350 Base L6.-cc
  • 1989-1993 Dodge D350 Base V8.-cc
  • 1994-2002 Dodge Ram 2500 Base L6.-cc
  • 1994-2002 Dodge Ram 2500 Base V8.-cc
  • 1994-2002 Dodge Ram 3500 Base L6.-cc
  • 1994-2002 Dodge Ram 3500 Base V8.-cc
  • 1989-1993 Dodge W250 Base L6.-cc
  • 1989-1993 Dodge W250 Base V8.-cc
  • 1989-1993 Dodge W350 Base L6.-cc
  • 1989-1993 Dodge W350 Base V8.-cc

BD Diesel - 1040022

BD Cummins Killer Frost Plug Plate - Dodge 1989-2002 5.9L

The coolant pressure inside the engine block can reach 70+psi at high rpm before the thermostat fully opens. This will cause a corroded frost plug to leak. The BD rear frost plug is able to be seal the leak without the need to hammer out the old frost plug. We recommend installing the rear frost plug plate when the transmission is removed. The plate can be installed with the transmission in place, however the surface finish on the back of the motor is critical and must be checked prior to use.

  • Works W/Frost Plug In Place/Blown Out/Leaking
  • No Need To Punch The Old Frost Plug Out
  • Utilizes One Large 333 O-Ring
  • Works With or Without A TCC Crossover Tube
  • Perfect Time To Install One Is When Transmission Is Removed
  • 12 Month Parts Warranty

Category: Killer Frost Plug Plate
Engine: 5.9L Cummins 98.5-02 24-Valve
Make: Dodge
Suggested Product: 1040182

  • 1989-1993 Dodge D250 Base L6.-cc
  • 1989-1993 Dodge D250 Base V8.-cc
  • 1989-1993 Dodge D350 Base L6.-cc
  • 1989-1993 Dodge D350 Base V8.-cc
  • 1994-2002 Dodge Ram 2500 Base L6.-cc
  • 1994-2002 Dodge Ram 2500 Base V8.-cc
  • 1994-2002 Dodge Ram 3500 Base L6.-cc
  • 1994-2002 Dodge Ram 3500 Base V8.-cc
  • 1989-1993 Dodge W250 Base L6.-cc
  • 1989-1993 Dodge W250 Base V8.-cc
  • 1989-1993 Dodge W350 Base L6.-cc
  • 1989-1993 Dodge W350 Base V8.-cc

Best Sellers